회사 세부 사항

  • Chongqing Honggong Construction Machinery Co., Ltd

  •  [Chongqing,China]
  • 회사유형:제조사
  • 주요 시장: 세계적인
  • 수출업자:1% - 10%
  • 인증서 표시:ISO9001
메세지 바구니 (0)

Chongqing Honggong Construction Machinery Co., Ltd

86-023-53580899

홈페이지> 블로그> Concrete mixer wear parts, mixer blades, mixer liners, stirring arm running-in period

Concrete mixer wear parts, mixer blades, mixer liners, stirring arm running-in period

October 19, 2018
First, wear faster. Due to factors such as processing, assembly and adjustment of new machine parts, the friction surface is rough, the contact surface area of the mating surface is small, and the pressure state of the surface is uneven. During the running process of the machine, the concaves and convexes on the surface of the parts engage with each other, and the metal scraps that have fallen down serve as abrasives and continue to participate in the friction, which also accelerates the wear of the parts' mating surfaces. Therefore, wear and tear of parts (particularly mating surfaces) are easily caused during the run-in period. At this time, if it is overloaded, parts may be destroyed and early failures may occur.

Second, poor lubrication. Since the newly assembled parts have a small fitting gap and due to assembly and the like, it is difficult to ensure the uniformity of the fitting gap, and the lubricant oil (grease) is not easy to form a uniform oil film on the friction surface to prohibit wear. As a result, the lubrication efficiency is reduced, resulting in abnormal abnormal wear of the parts. In severe cases, it can result in scratches or seizures on the surface of the precision-matched friction surface, causing failures.

Third, the new processing and assembly of parts, there is a geometric shape and fit the size of the deviation, in the initial application, due to impact, vibration and other alternating load, and heat, deformation and other factors, coupled with excessive wear and other reasons, Easily loosen the originally fastened parts.

Fourth, leakage occurred. Due to mechanical loosening, vibration and heat affected by the machine, the machine's sealing surface and pipe joints, etc., will exhibit leakage; some casting, machining and other shortcomings, it is difficult to invent during assembly and debugging, but due to the vibration during the work process , Impact, this shortcoming is exposed, expressed as leakage (seepage) oil (water). Therefore, the leakage phenomenon easily occurs during the run-in period.

Fifth, more mistakes in operations. Due to lack of understanding of the structure and performance of the machine (especially new operators), it is easy to cause malfunctions due to operational errors, and even cause mechanical accidents.
문의하기

Author:

Ms. Tian

Phone/WhatsApp:

+8615978952210

인기 상품
You may also like
Related Categories

이 업체에게 이메일로 보내기

제목:
이메일:
메시지:

Your message must be betwwen 20-8000 characters

문의하기

Author:

Ms. Tian

Phone/WhatsApp:

+8615978952210

인기 상품
공급 업체와 통신?공급 업체
Tian Ms. Tian
나는 당신을 위해 무엇을 할 수 있습니까?
공급 업체에 문의하십시오