Today, Hubei Cheng Li introduces you to the operation instructions of the road sweeper series sweeper.

Hubei Cheng Li Xiaobian often received a lot of user calls, ask how to operate the road sweeper? What should you pay attention to when operating procedures? Today, Hubei Cheng Li Xiao Bian will introduce you to the operating instructions of the road sweeper. Let's go and see it!
Road sweeper cleaning operation procedure. Press the front left and rear suction nozzles in order to lower the front and rear squeegees and nozzles, and then check whether the swash plate grounding is proper and whether the suction nozzle clearance is normal. If not, adjust it. Check the position of the handle of the three-way ball valve, select the opening and closing state of the left-sweep ball valve, open the total ball valve of the sprinkler system, and rotate the water pump switch to the “work” position. Check whether the rotation of the squeegee is normal and whether there is water spray from each water spout. After confirming that everything is normal, operate the auxiliary engine throttle to 2000-2300 rpm. Drive the vehicle to start with a file according to the requirements of the chassis. Pay close attention to the status of each instrument during the operation to confirm that the sweeper is working properly and the pump observes the cleaning effect. . According to the actual situation, reasonable choice of secondary engine speed, sweep speed and walking speed, so that the best cleaning effect. During the work process, pay attention to prevent the protruding surface of the road from colliding with the sweeping disk, and to retract the sweeping plate and the suction nozzle when reversing the vehicle. The larger debris on the road surface should be manually removed. Especially during the summer, if the hydraulic oil exceeds 70°C and there is a significant upward trend, it should be stopped immediately to eliminate the malfunction. When the water temperature of main and auxiliary engine water tanks exceeds 105 degrees Celsius, the engine should be shut down immediately.